The Real Shed Company
Protek Royal Exterior Wood Finish - Forest Green 5Ltr
This deep dark green is a stunning addition to the Royal range. It will suit external timber, garden products and interior wood.
Low maintenance weatherproof coating that contains UV filters to protect colours from fading. Microporous product that allows the timber to breathe.
High-end luxurious product that is enjoyable to use and easy to apply. Requires two to three thin coats and is suitable for smooth or rough timber.
• Window Frames
• Summer Houses
• Garden Furniture
• External Timbers and Cladding
• Long-lasting protection
• Low VOC (Volatile Organic Compounds)
• Low odour
• Water-based with linseed oil – natural renewable resource
• Translucent – allows wood grain to show through
• Rich long-lasting colour
• Water resistant with mould and fungal protection
• Microporous high-build coating
Coverage: 1 Litre will cover approximately 8m²
Advice: It is recommended that 2 – 3 coats be applied. If 1 coat is to be applied for a translucent look, apply Royal Clear on top to produce a harder surface finish. Protek Royal is a high-build formulation so each extra coat increases the colour and sheen. If applying to bare timber a knotting agent should be used prior to application. When applied to floorboards a top coat of breathable polyurethane sealant or varnish should be applied to protect against heavy foot traffic.
This is a protective water-repellent coating. If your timber isn't treated with a preservative then depending on the type of wood and product, you may want to use our Wood Prerserver
From the hills of Somerset Protek brings you the Royal range, a high quality decorative wood finish. Inspired by the lush countryside and rich heritage houses nestled within, the colours in the extensive Royal range are classic, contemporary and fit perfectly with modern design. Royal has been specially designed to give a long lasting protective coating with a soft lustre that allows the nature of wood and grain to show through.
Royal Exterior Superior Wood Finish is a high-grade water-repelling timber treatment that contains a mould inhibitor to protect the coating.It is perfect for use on all softwood and hardwood products such as windows, doors, conservatories, summerhouses, gates, cladding and garden furniture. This hard-wearing coating can be used on horizontal and vertical surfaces. Royal Exterior wood finish is low in odour and with low VOC (volatile organic compounds). It complies to EN71 parts 2 & 3 relating to child toy safety and flammability. The unique formulation is a water-based acrylic and alkyd hybrid that incorporates a polyurethane dispersion based on linseed oil - a renewable resource.
A 1 litre tin will cover approximately 8m2 depending on moisture content and porosity of the timber. It is recommended that 2 coats be applied with a 3rd coat if a deeper colour density is required. Royal Exterior Wood Finish is a high build formulation so each extra coat increases the colour and sheen. No primer or basecoat required. If applying to bare timber a knotting agent or stain blocking primer should be applied prior to Royal to prevent any possible resin bleed staining the coating
Satin with sheen increasing with further coats
2 – 5 years depending on levels of wear & tear + exposure
2 coats with a 3rd increasing the colour density
Approx. 6 – 10m2 per litre per coat. Coverage rates for 1st coat and rough-sawn timber will be at the lower end
Brush, Roller or Low Pressure Spray Gun
Touch-dry in 2 hours in normal weather. Allow approx. 2-4 hours before applying 2nd coat if conditions are clear and dry. Drying time will be far longer in cold humid conditions
VOC & Odour
Hardwood & Softwood Vertical & Horizontal surfaces
Planed & Rough-Sawn timber
Conservatories; Windows & Doors; Summerhouses; Gates;
Log Cabins; Furniture; Joinery & Cladding
1 litre, 2.5 litre and 5 litre tins or 25 litre drum
A lighter stain effect can be produced by applying a single coat of a colour with Royal Exterior Clear on top to provide full levels of protection.